Ges. Naturf. Freunde Berlin Mag. Neuesten Entdeck. Gesammten Naturk.1: 259. 1807
Mostly c, w North America, Mexico, South America, introduced in e North America and the Old World.
Species ca. 30 (18 in the flora).
The last attempt to account for the whole of Grindelia was by J. A. Steyermark (1934b). After comparing Steyermark’s treatment with specimens, one gets the impression that Steyermark had a keen eye for subtleties and trends in variation and that he sometimes assigned taxonomic ranks (species, variety, and forma) to trends rather than to what most botanists would consider to be taxa. Subsequently, writers of local and regional floras have felt obliged to recognize Steyermark’s “taxa.” Here, some of Steyermark’s “taxa” have been included within more broadly drawn circumscriptions; attention is called to them in discussions.
Within and among populations of grindelias, some morphologic traits appear to vary more from plant to plant than in most genera of composites. M. P. Dunford (1964) reported grindelias he had tested to be “essentially self-incompatible” and (1986) stated, “...Grindelia species are outcrossing and self-incompatible....” Some patterns of variation within Grindelia are similar to those found in genera characterized by apomictic seed production (e.g., local morphologic variants such as discoid plants in otherwise radiate taxa, hairy plants in otherwise glabrous taxa, narrow-leaved plants in otherwise broad-leaved taxa, etc.). See comments in discussion under 13. G. hirsutula.
References here to hybrids are based on observations by M. A. Wetter and/or on statements by M. P. Dunford (1964, 1986) and J. A. Steyermark (1934b).
Morphologic details and descriptive conventions for grindelias as treated here are:
Margins of most cauline leaves of most grindelias are usually dentate to serrate and have sharp, apiculate to setose teeth. Some species characteristically have cauline leaves with ± crenate margins and rounded, obtuse, or truncate teeth tipped by resin globules. Sporadically, individual plants may have some teeth resin-tipped and some teeth apiculate; such specimens may be hybrids or may indicate that the developmental paths to the two forms may be easily redirected. Plants with margins of some or all leaves entire may be encountered in almost all species of Grindelia and may predominate in some plants, populations, or species.
Leaf faces are usually gland-dotted with glands embedded in (or sessile in pits in) both the abaxial and adaxial epidermes. In some plants, populations, or species, the glands may be characteristically stipitate; developmental control for the different forms is apparently easily redirected (see comments under 11. Grindelia howellii).
Phyllaries are usually ± chartaceous proximally and herbaceous distally. Orientations of whole phyllaries and of their herbaceous apices are addressed in keys and descriptions. Individually, orientations of phyllaries vary from reflexed through spreading to appressed (often, within an involucre, outer phyllaries are ± reflexed and inner phyllaries are ± appressed). The herbaceous apices of phyllaries may be terete to flat and subulate to acuminate or acute, and vary from looped (coiled through ca. 270–400+ degrees), hooked (bent ± like a crozier through ± 180+ degrees), patent (bent at ± 90 degrees), or ± recurved or arcuate (sometimes incurved) to straight. An outer phyllary may be reflexed and have a looped, hooked, patent, recurved, or straight tip; an inner phyllary may be appressed and have a looped to hooked or recurved to straight tip; etc. The resin glands on the apices are usually circular, sometimes linear.
Cypselae of grindelias differ markedly from ovaries as seen at flowering. Cypselae are usually whitish or stramineous, sometimes brownish, grayish, reddish, or yellowish. They are usually ± compressed and ± ellipsoid to obovoid, sometimes 3–4-angled and ± reniform or rounded-prismatic. They are usually ± continuously variable in color, shape, size, and/or ornamentation within heads; sometimes they are ± dimorphic within heads, the outer differing from the inner in color, shape, size, and/or ornamentation. Cypselae that are 3- or 4-angled may have the angles ± thickened or ribbed. Apices of cypselae may be knobby (1–4 bumps or toothlike projections), coronate (a ± pronounced ridge), or smooth (rounded to ± truncate, not ornamented). Faces of cypselae may be smooth, striate (finely longitudinally nerved), ribbed, furrowed, or ± rugose (bumpy to tuberculate or with longitudinal and transverse fissures, grooves, or wrinkles).
Pappus elements are usually subulate scales (greatest width about 3 times thickness), setiform awns (greatest width about 2 times thickness), or bristles (width about equal to thickness) and are usually falling (± persistent subulate scales or setiform awns subtended by bristles in Grindelia ciliata). They may be ± straight or contorted to curled and may be smooth or barbellulate to barbellate; they were described as “entire” or “serrulate” to “setulose” by J. A. Steyermark (1934b) and others.
|1||Pappi (persistent or tardily falling) of 25–40, barbellate bristles subtending 8–15+ barbellate, setiform awns or subulate scales||Grindelia ciliata|
|1||Pappi (readily falling) of (1–)2–3(–8+), smooth or barbellulate to barbellate bristles, setiform awns, or subulate scales||> 2|
|2||Mostly annuals and biennials, some perennials; margins of cauline leaves ± crenate to serrate (usually from bases to apices, teeth usually rounded, obtuse, or blunt, usually resin-tipped; rarely some or all leaves of a plant entire)||> 3|
|2||Mostly perennials or subshrubs, some biennials or annuals; margins of cauline leaves usually serrate to dentate or denticulate (from bases to apices or mostly toward apices, teeth sharp, apiculate to setose), sometimes entire||> 9|
|3||Stems glabrous; pappi usually shorter than, sometimes nearly equaling, disc corollas||> 4|
|3||Stems usually villous or villosulous to hirtellous (at least distally), sometimes stipitate-glandular as well, sometimes glabrate; pappi usually equaling or surpassing disc corollas||> 6|
|4||Blades of cauline leaves oblanceolate or lanceolate to linear (the distal ± appressed; marginal teeth mostly 9–15 per cm), apices acute to acuminate; phyllary apices incurved to straight||Grindelia grandiflora|
|4||Blades of cauline leaves mostly ovate, obovate, or oblong to spatulate, sometimes oblanceolate, lanceolate, or linear (the distal not ± appressed; marginal teeth mostly 3–9 per cm), apices obtuse to acute; phyllary apices looped to hooked or recurved to nearly straight||> 5|
|5||Blades of cauline leaves (5–)10–15(–30) mm; phyllary apices recurved to nearly straight||Grindelia oxylepis|
|5||Blades of cauline leaves (10–)15–70 mm; phyllary apices usually looped to hooked, sometimes recurved to nearly straight||Grindelia squarrosa|
|6||Perennials; cauline leaves (7–)15–30(–55) mm (marginal teeth usually 3–5 per cm); faces of cypselae smooth or striate (angles ± ribbed)||Grindelia havardii|
|6||Annuals; cauline leaves 10–60(–90) mm (marginal teeth usually 5–14 per cm); faces of cypselae usually ± rugose, sometimes smooth or striate||> 7|
|7||Faces of leaf blades usually hirtellous and glandular (glands usually stipitate, sometimes sessile, seldom in pits); faces of cypselae rugose (and transversely fissured)||Grindelia pusilla|
|7||Faces of leaf blades usually hirtellous to scabridulous and glandular (glands usually in pits, sometimes sessile, seldom stipitate), sometimes glabrate; faces of cypselae smooth, striate, or rugose (little, or not all, transversely fissured)||> 8|
|8||Plants 30–130 cm; blades of cauline leaves ovate or ± triangular to oblong or obovate, 15–60(–90) mm (marginal teeth 8–14 per cm)||Grindelia adenodonta|
|8||Plants 15–40 cm; blades of cauline leaves ± oblong or spatulate,10–30(–45+) mm (marginal teeth 6–8 per cm)||Grindelia microcephala|
|9||Stems decumbent to ascending (from rhizomes); heads borne singly; involucres hemispheric to campanulate; rays 0||Grindelia oölepis|
|9||Stems usually erect, sometimes prostrate to decumbent or ascending (not from rhizomes); heads usually in corymbiform to paniculiform arrays, seldom borne singly; involucres usually broadly urceolate to globose, sometimes hemispheric, campanulate, or obconic; rays 0 or 5–60+||> 10|
|10||Stems arachnose, hirsutulous, hirtellous, puberulous, or villous and/or stipitate-glandular||> 11|
|10||Stems usually glabrous, rarely sparsely pilose to pilosulous||> 14|
|11||Pappi of 2–4 ± straight, usually barbellulate, sometimes smooth, bristles slightly shorter than to ± equaling disc corollas||Grindelia scabra|
|11||Pappi of 2–4(–6), usually contorted to curled, sometimes nearly straight, smooth or barbellulate, subulate scales or setiform awns usually shorter than, rarely nearly equaling, disc corollas||> 12|
|12||Apices of phyllaries mostly looped to hooked (inner sometimes recurved to straight)||Grindelia howellii|
|12||Apices of phyllaries slightly recurved, straight, or incurved||> 13|
|13||Blades of cauline leaves mostly lanceolate or lance-attenuate (broadest proximal to midpoints), bases clasping (± cordate), margins usually entire, rarely serrate to denticulate, apices acute to attenuate; phyllary apices ± stipitate-glandular||Grindelia integrifolia|
|13||Blades of cauline leaves mostly oblong, oblanceolate, or spatulate (broadest at or beyond their midpoints), bases clasping or cuneate, margins usually serrate to dentate, sometimes entire, apices truncate, rounded, or obtuse to acute; apices of phyllaries seldom, if ever, stipitate-glandular||Grindelia hirsutula|
|14||Apices of phyllaries (most or at least the outer) looped to hooked or patent (inner may be recurved, straight, or incurved)||> 15|
|14||Apices of phyllaries mostly slightly incurved, straight, or slightly recurved.||> 17|
|15||Pappi of 4–8 straight, barbellate to barbellulate bristles or setiform awns||Grindelia subalpina|
|15||Pappi of 2–4(–6) usually contorted to curled, sometimes straight, smooth or barbellulate, subulate scales or setiform awns||> 16|
|16||Apices of phyllaries usually moderately to strongly resinous; pappi of 2–3(–6), usually contorted to curled, sometimes straight, setiform awns or subulate scales||Grindelia hirsutula|
|16||Apices of phyllaries slightly to moderately resinous; pappi of 2–4 straight or slightly contorted, setiform awns or subulate scales||Grindelia decumbens|
|17||Pappi of 2 straight, smooth (apices often dilated), setiform awns 4–8 mm, usually equaling to slightly surpassing disc corollas||Grindelia lanceolata|
|17||Pappi of 2–3(–6) straight or contorted to curled, smooth or barbellulate to barbellate (apices not dilated), setiform awns or subulate scales 2–5(–7) mm, usually shorter than, sometimes nearly equaling, disc corollas||> 18|
|18||Involucres usually broadly urceolate to globose; rays 0 or (5–)15–60+, laminae (4–)10–25+ mm||Grindelia hirsutula|
|18||Involucres usually campanulate to obconic, sometimes hemispheric; rays 0 or 5–26, laminae 3–10 mm||> 19|
|19||Cauline leaves: faces of blades glabrous (or scabridulous near margins) and sparsely, or not at all, gland-dotted; rays 0 or 8–26, laminae (5–)7–10 mm||Grindelia arizonica|
|19||Cauline leaves: faces of blades glabrous and densely gland-dotted; rays 5–13,laminae 3–5(–7) mm||Grindelia fraxinipratensis|
|Author||John L. Strother + and Mark A. Wetter +|
|Common name||Gum-plant + and resin-weed +|
|Etymology||For David Hieronymus Grindel, 1776–1836, Latvian botanist +|
|Illustrator||Yevonn Wilson-Ramsey +|
|Reference||dunford1964a +, dunford1986a +, nesom1990k +, steyermark1934b + and steyermark1937a +|
|Taxon name||Grindelia +|
|Taxon parent||Asteraceae tribe Astereae +|
|Taxon rank||genus +|
|Volume||Volume 20 +|